This Manual will take you through the full onboarding process, with what information you are required to provide, the documents you will need on hand and how to upload your information.

Step 1

Go to https://stackermarket.sgpmx.com/ and press "Don't have an account? Register now".

Step 2:

Read and accept the notice by the Ministry of Law. After that, select “Corporate account” and input the following information, then press “Create account”.

  • First Name

  • Last Name

  • Email

  • Password

  • Birthday

  • Nationality

  • Did someone refer you?

  • Check the box after reading the Terms and Conditions

In order to complete an account application for a legal entity, the trustee who is authorised to act on behalf of the Trust Account must complete the registration process first. Further to completion, the information and documents required for the entity will then be collected.

Step 3:

A verification email will be sent to you. Open the email and press “Confirm email address”.

Now, your account has been enabled and you are able to log in.

Note: Press “Forgot password” in case you cannot remember your password.

Step 4:

After you are logged in to your account using your email address and password, follow the instructions.

Click “Start verification” to start the identity verification process, or click “Skip to Dashboard” to look around your dashboard and to do the verification at a later point.

Step 5:

Prepare your ID and Proof of Address document and press “OK”. If you do not have all documents at hand, you can revisit the verification process at a later point in time again.

ID Card or Passport
You are required to take a picture (photograph/scan) of your valid document to provide proof of your identity.

Bank Statement or Utility Bill
You are required to take a picture (photograph/scan) of a bank statement, government issued letter or utility bill to provide proof of your address. The document must have your name and address on it and should not be older than 3 months.

Step 6:

Select your preferred language for the verification process.

Step 7:

Enter your:

  • First Name

  • Last Name

  • Middle Name (if applicable)

and press “OK”.

Step 8:

Select your Gender and press “OK”.

Step 9:

Enter your Birthday and press “OK”.

Step 10:

Select your Country of Citizenship and press “OK”.


Note: Your Nationality may not be the same as the Country in which you reside. For example, you are a Singaporean citizen, residing in Hong Kong. Here you would enter Hong Kong.

Step 11:

Enter the Identification Number of your ID Card or Passport document and press “OK”.

Step 12:

Enter the Issuance Date and Expiry Date of your ID card or Passport document and press “OK”.

Note: If your document does not have any document date, you may input your birth date.

Step 13:

Select the correct phone country code and enter your Phone Number. Then, press “OK”.

Step 14:

Select the type of your ID document you would like to provide for the verification process.

The options available are Passport and ID Card.

Step 15:

Choose how you would like to provide a picture of your ID document.

Use Webcam
Take a picture of your ID document.

Note: The details of the ID document should be clearly visible in the picture.

Upload a File
Upload a previously taken picture (photograph/scan) of your ID document. To upload the picture, you may choose to either:

  • Drag and drop the document from your device into the "Drag and drop or browse files..." field

  • Click on the "Drag and drop or browse files..." field to browse for the files from your device

Note: The details of the ID document should be clearly visible in the picture.

Step 16:

Choose how you would like to provide a video of your face from the front, both sides, and showing the front of your ID document.

Use Webcam
Take a video of you and your ID document. Follow the instructions provided on the screen.

Upload a File
You can also upload a video that had been taken separately. Follow the instructions provided on the screen and upload the video by clicking on the Upload video button.

Step 17:

Select your Country of Residence and press “OK”.

Step 18:

Enter the City/town/village you live in and press “OK”.

Step 19:

Enter your Address and press “OK”.

Step 20:

Choose how you would like to provide your Proof of Address.

It should be a photograph or scan of a bank statement, government issued letter or utility bill to provide proof of your address. The document must have your name and address on it and should not be older than 3 months. You may read more about the Proof of Address by clicking here.

Use Webcam
Take a photograph of your Proof of Address document.

Upload a File
Upload a previously taken picture (photograph/scan) of your Proof of Address document. To upload the picture, you may choose to either:

  • Drag and drop the document from your device into the "Drag and drop or browse files..." field

  • Click on the "Drag and drop or browse files..." field to browse for the files from your device

Congratulations, you've completed the KYC part of the registration!

Once you press "Next" you will be asked for the information and documents relating to the legal entity you are registering for a Business (Trust) account.

Step 21:

Click "OK" to provide your information & documents for the legal entity applying for this Business account.

Step 22:

Click “Yes” that you are authorised to act for this entity.


Note: The user should be authorised to provide this information on behalf of the legal entity.

For this section, you may leave the "Please select position" field blank and click "OK".

Step 23:

From the drop down list, select "Trust" and click "OK".

Step 24:

Input the name of your Trust and registration number (if applicable) and click "OK".

Note: The "Registration Number" field is not mandatory for Trusts which are not issued with a registration number. For such scenarios, you may input "Not Applicable".

Step 25:

Input “Country of Registration” and “Date of Establishment” of the Trust and click “OK”.

Step 26:

Check the box if your entity is licensed by a professional association or regulator. Input the “Association number” (the license number allocated by the professional association or regulator) and click “OK”.

If your entity is not licensed, click “OK” without checking the box.

Step 27:

Input your Trust’s Country and Postal Code location and click “OK”.

Step 28:

Input your Trust’s Street Name, Number, City and State details and click “OK”.

Step 30:

Drag and Drop the document you are using as a proof of address for your Trust address and click “OK”.

Note: Examples of proof of address are utility bills, bank/financial institution statements, or government authority letters.

Step 31:

Click the box if the registration address is the same as your Trust’s location and click “OK”.

If the Registration Address differs from the location of your entity, ensure that the box is not checked and enter the address details.

Note: You will also need to provide a Proof of Address for your entity's Registration Address where this is different from the address.

Step 32:

Input the main phone number to be used to contact your entity about the Trust account and click “OK”.

Step 33:

Select "Trusts" from the drop down list and click “OK”.

Step 34:

Drag and Drop your Trust Certificate/Agreement and click "OK".

Step 35:

Drag and Drop your Trust Certificate/Agreement to indicate the names of the participants of the Trust and click “OK”.

Step 36:

Click “Upload Documents” to upload Proof of Identity document for the Ultimate Beneficial Owner, Trustee or Persons Authorised to act in your Trust.

Click “Add Contact Information” to input the full name and email of the identity document holder who is a Ultimate Beneficial Owner, Trustee or Person Authorised to act.

Note: This step may be repeated numerous times to upload a number of identity documents and details in accordance with the number of Persons Authorised to act.

Step 37:

Drag and drop the Trust Certificate/Agreement you are using as proof of ownership or control for your Trust, and then click “OK”.

Note: This document will reflect the names you have entered in the "Contact Information" step above.

Step 38:

Input the Expected Turnover for your Trust account in US Dollar.

Note: The Expected Turnover refers to the expected total value of precious metals your entity wishes to trade within a year.

Check the box if any individual or legal entity in this application is considered a “US Person” in accordance with FATCA and click "OK".

Step 39:

Congratulations, your registration is completed!

Press “Encrypt”, and your provided information will be submitted to our compliance team, which will review your details for completeness and eligibility. This process usually takes 1-3 business days. We will notify you if we are missing any details or once your account is approved.

Did this answer your question?